Short Description
The SDC 3000 CU central unit is designed to control conference systems with up to 150 conference terminals. Three cable lines with 50 terminals each can be connected to the unit via CONFERENCE BUS OUT I-II-III. Its internal PSU powers up to 25 conference terminals (larger systems require additional power supply units).Up to four central units can be linked with system cables to create conference systems for up to 600 participants.

Features

• Central unit controls up to 150 conference terminals
• Four central units can be cascaded for systems with a maximum of 600 terminals
• Three cable lines with up to 50 terminals each per central unit
• Internal PSU for powering up to 25 conference terminals
• Three conference modes: "Automatic", "Request" and "Overrun"
• XLR Audio Out (line) for conference channel
• XLR Audio In switchable between line and mic
• 11 analogue line inputs for interpreter channels
• 2 analogue line outputs for conference channel plus 11 interpreter channels
• RS 232 connector for PC control

Short Description
The SDC 3000 D is an extremely easy-to-use conference terminal. It features a built-in loudspeaker and electret microphone, ensuring excellent sound reproduction throughout the entire conference room. The unit is controlled via the MIC key. By pressing this key, for example, the participant can activate the microphone or "apply" to take the floor. A red LED ring on the microphone indicates who is allowed to take the floor or who has applied for a comment. In Voting Mode, the unit's three keys are assigned yes/no/abstention.

A simple change in configuration at the SDC CU central unit is all that is needed to turn the delegate unit into a chairperson unit. Two control keys which are otherwise inactive will be assigned special functions.

Features

• Conference terminal with built-in electret microphone and loudspeaker
• Gooseneck microphone with LED ring
• Microphone key with LED
• Terminal can be used as a delegate unit or – by altering the configuration – as a chairperson unit
• Voting function (yes/no/abstention)
• Headphone output (fixed volume)

Short Description
The SDC system software enables you to configure and control the entire SDC 3000 system via PC. Large conferences can be conveniently controlled via graphical user interface and mouse. The software is copy protected by a dongle.

Minimum system requirements:

• 450 MHz processor (Intel Pentium or AMD Athlon)
• 64 MB RAM (128 MB RAM recommended)
• 20 MB available hard disk space
• CD or DVD-ROM drive
• Graphics card, 15" TFT screen or 17" monitor with a resolution of at least 1024 x 768 pixels
• a USB or parallel port for the copy protection dongle
• a serial port for connection to the SDC CU central unit
• Microsoft Windows 2000, NT, 98, 98 SE or 95

Features

• Displays the seating plan and the names of all participants
• Indicates the status of the conference terminals (microphone on/off/muted)
• Displays the participants who have "applied" to take the floor
• Chronological list of the last nine speakers
• Displays the remaining speaking time (if a maximum speaking time has been chosen)
• Indicates date and time
• For creating and storing any seating plans and system configurations
• For determining who is allowed to take the floor and passing on the "speaking rights"
• Software starts the voting mode, displays and stores results
• Modification of audio settings during operation

Wired Mics

Installed Sound

Wireless Mics

Short Description
AudioBeam, Sennhieser's new ultra-directional loudspeaker, allows sound to be placed precisely where you need it. Whether you are enjoying art in a museum, using an ATM, or sitting in front of your PC, the AudioBeam can bring information directly to your ear.
How It Works

Short Description
Mounting plate for wall and ceiling mounting

Short Description
Swivel joint for aligning the AudioBeam, to be used with a stand or the GZP10 mounting plate. Includes thread adapter from 1/4" to 3/8".

Short Description
Radio microphone with 100 mW transmitter output power, switchable to 6 fixed set frequencies between 30 and 50 MHz in the 8m band.

Short Description
High wearing comfort, even over long periods, due to the low 60g weight of this stethoset receiver.

Short Description
This convenient charging and transport case contains two interconnected 10-way charging units for up to 20 HDE 1030 receivers. Complete charging is carried out within 14 hours and may subsequently be switched to trickle-charge. The case is also used for the storage of the handheld transmitter and a lavalier clip. For rechargeable battery operation of the transmitter, an additional single charger (L 1032) can be integrated.

Short Description
The EMP 2015 Soundfield System consists of a pocket transmitter (SK 500), headmic (ME 3), amplifier with integrated receiver (EMP 2015)and 2 wall mounted speakers (DAS Factor 5). It is especially well-suited for medium to large classrooms to create a uniform soundfield throughout the entire learning environment. The system can be expanded to include up to 8 speakers for larger rooms.

Features

• Integrated amplifier and receiver,simple to setup
• Auxiliary inputs for multi-media applications and personal FM assistive listening
• Advanced PLL and microprocessor technology for trouble free operation
• HDX noise reduction system for excellent audio quality
• Facilitates two additional SK 500s for team teaching

Short Description
The EMP 2015 Soundfield System consists of a pocket transmitter (SK 500), headmic (ME 3), amplifier with integrated receiver (EMP 2015)and 2 wall mounted speakers (DAS Factor 5). It is especially well-suited for medium to large classrooms to create a uniform soundfield throughout the entire learning environment. The system can be expanded to include up to 8 speakers for larger rooms.

Features

• Integrated amplifier and receiver,simple to setup
• Auxiliary inputs for multi-media applications and personal FM assistive listening
• Advanced PLL and microprocessor technology for trouble free operation
• HDX noise reduction system for excellent audio quality
• Facilitates two additional SK 500s for team teaching

Short Description
The EMP 2015 Soundfield System consists of a pocket transmitter (SK 500), headmic (ME 3), amplifier with integrated receiver (EMP 2015)and 2 wall mounted speakers (DAS Factor 5). It is especially well-suited for medium to large classrooms to create a uniform soundfield throughout the entire learning environment. The system can be expanded to include up to 8 speakers for larger rooms.

Features

• Integrated amplifier and receiver,simple to setup
• Auxiliary inputs for multi-media applications and personal FM assistive listening
• Advanced PLL and microprocessor technology for trouble free operation
• HDX noise reduction system for excellent audio quality
• Facilitates two additional SK 500s for team teaching